Next, let's talk aboutPull ring easy-open lidthe four major advantages and characteristics

The four major advantages and characteristics of the pull ring easy-open lid

1. Environmentally hygienic, rust-resistant, easy to open without auxiliary tools, the bottle cap has a destructive feature, and can effectively prevent theft.

2. It has good buffering, shock resistance, thermal insulation, waterproof, and solvent corrosion resistance characteristics, non-toxic, moisture-proof, clean, non-falling off, and good sealing performance.

3. According to different requirements, the stainless steel spherical lid is heat-resistant, moisture-resistant, and ethanol-resistant, and decorative patterns can be achieved through color printing, lettering, and engraving.

4. The inner pad uses special crystal drip glue materials and excellent production technology, making the sealing of the water bottle better, and the outer cover surface has more flat patterns, making the printed logo and bottle cap more aesthetically pleasing, giving bottled products more significance.

Common sterilization methods for pull ring easy-open lids

There are four common sterilization methods for pull ring easy-open lid cans: steam, side spray, top spray, and sand bath. Each of these common sterilization methods has its own advantages and disadvantages.

The side spray sterilization pot is specially developed for items using inflatable packaging bags. The heating method uses a side spray circulating water system to heat or freeze the disinfected items. Since most circulating water systems spray simultaneously, the temperature of the products in all places is the same, and the issue of uneven temperature distribution can generally be ignored. In all operations, the capacity of the circulating water system and the products in the pot is less than 50%, and most of the indoor space is steam, making it easy to adjust the pressure inside the sterilization pot. This means that the pressure inside the sterilization pot can be accurately controlled according to the set requirements, which is very helpful for inflatable aluminum foil packaging bags.

For the full water sterilization pot method, because the specific gravity of water generally exceeds that of the sterilized food, and the aluminum foil packaging bag is filled with inert gas, the products remain in a floating state throughout the sterilization process. The serious overlap of products affects the circulation of the circulating water system, directly impacting the distribution of heat. Since 95% of the indoor space of the sterilization pot is occupied by objects and water, the control of pre-pressure during the entire sterilization process in the full water sterilization pot appears to fluctuate greatly, and its linearity differs significantly from that of the top spray and side spray.

Next, let's talk aboutPull ring easy-open lidThe manufacturing and principle of the ring

The manufacturing of the pull ring on the easy-open lid is achieved simultaneously with the cover in the stamping machine. The pull ring strip is fed into the machine, using a servo motor to control the pull ring mold, and through stamping processing, it sequentially performs processes such as positioning holes, separating holes, finger holes, screw holes, cutting, pre-rolling, 90-degree downward, final rolling, and seam forming, transmitting the finished pull ring to the pull ring strip, and then sent to the fifth module process, where it is riveted with the outer cover to form the mold.